Printer Friendly Page
Foam Wall Textured Containment Berm
#TFBERM1212 NEW!
Description
Foam Wall berms offer drive-in capability and outstanding containment capacity.
- Textured floor option is designed with safety in mind, especially when working in wet, oily, or soapy environments
- Surface texture increases traction underfoot by providing more grip between boots and the berm floor, helping to reduce the risk of slips and falls during washdowns, decon, or containment operations
- Simply clean and store after use
- Soft foam sidewalls allow you to roll in equipment or vehicles — just set up and go
- Low profile 4” walls compress under equipment then bounce back into shape
- Reusable berm is ideal for short-term applications
- Drain Plug options available
- This item drop ships from a vendor
Specifications
| Dimensions | - 12' W x 12' L x 4" H |
| Shipping Dimensions | - 40" W x 48" L x 10" H |
| Sold as | - 1 per package |
| Color | - Black |
| Composition | - 36mil Reinforced Polyethylene |
| Sump Capacity | - 359 cu. yds. per package |
| Weight | - 40 lbs. |
| # per Pallet | - 6 |
| Incinerable | - No |
| Ship Class | - 300 |
| UNSPSC | - 24111812 |
Technical Documents
Regulations and Compliance
| 40 CFR 263.30(a) | - In the event of a spill, transporters must, "take appropriate immediate action to protect human health and the environment." |
| 40 CFR 264.175 | - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons. |
There are no known notices or warnings for this product.