Printer Friendly Page
Foam Wall Economy Containment Berm
#BERM1250FE
Description
Foam berms offer drive-in capability and outstanding containment capacity.
- Soft foam sidewalls allow you to roll in equipment or vehicles with minimal set up
- Capture and contain leaks, drips or spills from drums, tanks, totes, equipment or vehicles
- Use for frac tanks, vehicle washdown, refueling areas and secondary containment areas
- Low profile 4” walls compress under equipment then bounce back into shape
- Simply unfold and use; No setup needed
- Easy cleaning and storage
- Designed for repeated use
- Made with 45mil Reinforced Polyethylene (RPE), which is lightweight and highly chemically compatible
Specifications
| Dimensions | - 50' W x 12' L x 4" H |
| Shipping Dimensions | - 48" W x 72" L x 75" H |
| Sold as | - 1 per package |
| Color | - Black |
| Composition | - 45mil Reinforced Polyethylene/Built in Foam Sidewalls |
| Sump Capacity | - 1496 gal. per package |
| Weight | - 200 lbs. |
| # per Pallet | - 2 |
| Incinerable | - No |
| Ship Class | - 300 |
| UNSPSC | - 24111812 |
Technical Documents
Regulations and Compliance
| 40 CFR 263.30(a) | - In the event of a spill, transporters must, "take appropriate immediate action to protect human health and the environment." |
| 40 CFR 264.175 | - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons. |
There are no known notices or warnings for this product.