Printer Friendly Page

Build Your Own Berm Wall Ends


Build Your Own Berm Wall Ends
Click to view larger image


Build your own barrier around equipment or storage, indoors or out.

  • Seals tight against floor and wall for a leak-free connection
  • Semi-permanent, highly visible berm customizable to your desired size and shape
  • Vinyl covered foam barrier resists oils, coolants and most chemicals
  • Easy to cut with utility knife
  • Recovers its shape under foot traffic or light, wheeled equipment


Dimensions - 5.5" W x 3" L x 2" H
Shipping Dimensions - 9.45" W x 9.45" L x 6.75" H
Sold as - 2 per package
Color - Yellow
Composition - 18oz All-Vinyl Covering with Open-Cell Foam Interior
Weight - 1 lb.
# per Pallet - 230
Incinerable - No
Ship Class - 250
UNSPSC - 24101907
BYOB: Build Your Own Berm Instruction Sheet
Helps You Comply

Technical Documents

Regulations and Compliance

40 CFR 112.7(c)(1) - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course."
40 CFR 122.26 - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons.

There are no known notices or warnings for this product.