Printer Friendly Page

Build Your Own Berm Vented Corners

#BYOB-2VC

Build Your Own Berm Vented Corners
Click to view larger image

Description

Build your own barrier around equipment or storage, indoors or out.

  • Vent releases air pressure caused by foot traffic or light, wheeled equipment; berms recover their shape
  • Join two Build-Your-Own-Berm sections at a 90-degree angle
  • Semi-permanent, highly visible berm customizable to your desired size and shape
  • Vinyl covered foam barrier resists oils, coolants and most chemicals
  • Easy to cut with utility knife

Specifications

Dimensions - 5.5" W x 7.25" L x 2" H
Shipping Dimensions - 12.6" W x 18.5" L x 2.75" H
Sold as - 2 per package
Color - Yellow
Composition - 18oz All-Vinyl Covering with Open-Cell Foam Interior
Weight - 1.3 lbs.
# per Pallet - 230
Incinerable - No
Ship Class - 250
UNSPSC - 24101907
BYOB: Build Your Own Berm Instruction Sheet
Helps You Comply

Technical Documents

Regulations and Compliance

40 CFR 112.7(c)(1) - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course."
40 CFR 122.26 - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons.

There are no known notices or warnings for this product.