Printer Friendly Page

Build Your Own Berm Straight Section


Build Your Own Berm Straight Section
Click to view larger image Click to view larger image Click to view larger image


Build your own barrier around equipment or storage, indoors or out.

  • Semi-permanent, highly visible berm is customizable to your desired size and shape
  • Vinyl covered foam barrier resists oils, coolants and most chemicals
  • Recovers its shape under foot traffic or light, wheeled equipment
  • Easy to cut with utility knife
  • Secure to smooth surfaces with Sili-Thane (BYOB-SEAL) sealant or join seams with Industrial Strength Vinyl Cement (BYOB-CEMENT)
  • Inexpensive and easy-to-install containment alternative to cement curbs or angle iron
  • Simple removal with flat-bladed shovel
  • Ideal for leak-prone areas like battery charging stations or machinery


Dimensions - 5.5" W x 15' L x 2" H
Shipping Dimensions - 30.33" W x 30.33" L x 6.75" H
Sold as - 1 per package
Color - Yellow
Composition - 18oz All-Vinyl Covering with Open-Cell Foam Interior
Weight - 6 lbs.
# per Pallet - 24
Incinerable - No
Ship Class - 300
UNSPSC - 24101907
BYOB: Build Your Own Berm Instruction Sheet
Helps You Comply

Technical Documents

Regulations and Compliance

40 CFR 112.7(c)(1) - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course."
40 CFR 122.26 - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons.

There are no known notices or warnings for this product.