Printer Friendly Page

Drive Over Build Your Own Berm® Straight Section

#DOBYOB-2S

Drive Over Build Your Own Berm® Straight Section
Click to view larger image Click to view larger image Click to view larger image

Description

Contain and control liquid in high-traffic areas.

  • Customizable containment barriers pop right back to form after vehicles, pallet jacks or dollies roll over them
  • Berm compresses to approximately 1/4" when driven over; constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core
  • 2" height accommodates low-clearance traffic
  • Durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles
  • Included: 6 - 4'L x 1/8"H x 1'W Aluminum Mounting Strips & 33 - 1/4" x 1-5/8" Galvanized Steel Anchors

Specifications

Dimensions - 5.5" W x 12' L x 2" H
Shipping Dimensions - 9" W x 48" L x 9" H
Sold as - 1 per package
Color - Orange
Composition - Cover - 40 oz Vinyl Coated Fabric
Core - Open-Cell Polyurethane Foam
Strips - Aluminum
Anchors - Galvanized Steel

Weight - 11.5 lbs.
# per Pallet - 32
Incinerable - No
Ship Class - 175
UNSPSC - 24101907
Drive-Over Build Your Own Berm Installation Instructions
Helps You Comply

Technical Documents

Regulations and Compliance

40 CFR 112.7(c)(1) - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course."
40 CFR 122.26 - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons.

There are no known notices or warnings for this product.