Printer Friendly Page

Build Your Own Berm® Straight Section

#BYOB-2S

Build Your Own Berm® Straight Section
Click to view larger image Click to view larger image Click to view larger image

Description

Build your own barrier around equipment or storage, indoors or out.

  • Semi-permanent, highly visible berm is customizable to your desired size and shape
  • Vinyl covered foam barrier resists oils, coolants and most chemicals
  • Recovers its shape under foot traffic or light, wheeled equipment
  • Easy to cut with utility knife
  • Secure to smooth surfaces with Sili-Thane (BYOB-SEAL) sealant or join seams with Industrial Strength Vinyl Cement (BYOB-CEMENT)
  • Inexpensive and easy-to-install containment alternative to cement curbs or angle iron
  • Simple removal with flat-bladed shovel
  • Ideal for leak-prone areas like battery charging stations or machinery

Specifications

Dimensions - 5.5" W x 15' L x 2" H
Shipping Dimensions - 30.33" W x 30.33" L x 6.75" H
Sold as - 1 per package
Color - Yellow
Composition - 18oz All-Vinyl Covering with Open-Cell Foam Interior
Weight - 6 lbs.
# per Pallet - 24
Incinerable - No
Ship Class - 300
UNSPSC - 24101907
Build Your Own Berm Installation Instructions
Helps You Comply

Technical Documents

Regulations and Compliance

40 CFR 112.7(c)(1) - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course."
40 CFR 122.26 - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways.
40 CFR 264.175 - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons.

There are no known notices or warnings for this product.