Printer Friendly Page
Build Your Own Berm Installation Instructions
Build Your Own Berm® Corners
#BYOB-2C
Description
Build your own barrier around equipment or storage, indoors or out.
- Join two Build-Your-Own-Berm sections at a 90-degree angle
- Semi-permanent, highly visible berm is customizable to your desired size and shape
- Vinyl covered foam barrier resists oils, coolants and most chemicals
- Easy to cut with utility knife
- Recovers its shape under foot traffic or light, wheeled equipment
Specifications
Dimensions | - 5.5" W x 7.25" L x 2" H |
Shipping Dimensions | - 12.6" W x 18.5" L x 2.75" H |
Sold as | - 2 per package |
Color | - Yellow |
Composition | - 18oz All-Vinyl Covering with Open-Cell Foam Interior |
Weight | - 2 lbs. |
# per Pallet | - 230 |
Incinerable | - No |
Ship Class | - 250 |
UNSPSC | - 24101907 |
Technical Documents
Regulations and Compliance
40 CFR 112.7(c)(1) | - Facilities must have "appropriate containment and/or diversionary structures to prevent discharge oil from reaching a navigable water course." |
40 CFR 122.26 | - Facilities must have a detailed plan in place to prevent illegal discharge of pollutants into waterways. |
40 CFR 264.175 | - Hazardous waste containment systems must be free of structural cracks or gaps; designed to keep spilled liquids from remaining in contact with the container; prevent run-on and "have sufficient capacity to contain 10% of the volume of the containers or the volume of the largest container, whichever is greater." For example, four 55-gallon drums require secondary containment of 55 gallons. |
There are no known notices or warnings for this product.